Straight With Handrails

This is for a 12 Riser Straight Staircase with handrails on the left hand side going up the staircase, the staircase will be made to 42º please select from the options provided.

Specification
Strings - 32mm Engineered Pine
Treads - 22mm MDF
Risers - 9mm Plywood
Newel Posts - 90 x 90mm Pine Square
Spindles - 32 x 32mm Pine Square
Handrail - 66 x 63mm Pine SHR Profile
Baserail - Pine SBR Profile

Please note the newel posts will add 30mm to the overall width.

What you get - The stair strings on the face side are Tenoned ready for the newel posts, the newel posts are morticed ready for the strings and the handrails, the handrail is Pre-cut , the Baserail is Pre-cut - the Spindles are Pre-cut, the Fillets are supplied oversize (You will need to cut these). Newel caps are not supplied.

Staircases with individual riser heights less than 198mm will have a individual going size of 220mm so the pitch will be slightly less than 42º

The Rise is the Floor to floor Height.

Typical production time on these is 2 weeks, then delivery subject to a delivery run in your area.

This is for a 13 Riser Straight Staircase with handrails on the left hand side going up the staircase, the staircase will be made to 42º please select from the options provided.

Specification
Strings - 32mm Engineered Pine
Treads - 22mm MDF
Risers - 9mm Plywood
Newel Posts - 90 x 90mm Pine Square
Spindles - 32 x 32mm Pine Square
Handrail - 66 x 63mm Pine SHR Profile
Baserail - Pine SBR Profile

Please note the newel posts will add 30mm to the overall width.

What you get - The stair strings on the face side are Tenoned ready for the newel posts, the newel posts are morticed ready for the strings and the handrails, the handrail is Pre-cut , the Baserail is Pre-cut - the Spindles are Pre-cut, the Fillets are supplied oversize (You will need to cut these). Newel caps are not supplied.

Staircases with individual riser heights less than 198mm will have a individual going size of 220mm so the pitch will be slightly less than 42º

The Rise is the Floor to floor Height.

Typical production time on these is 2 weeks, then delivery subject to a delivery run in your area.

This is for a 14 Riser Straight Staircase with handrails on the left hand side going up the staircase, the staircase will be made to 42º please select from the options provided.

Specification
Strings - 32mm Engineered Pine
Treads - 22mm MDF
Risers - 9mm Plywood
Newel Posts - 90 x 90mm Pine Square
Spindles - 32 x 32mm Pine Square
Handrail - 66 x 63mm Pine SHR Profile
Baserail - Pine SBR Profile

Please note the newel posts will add 30mm to the overall width.

What you get - The stair strings on the face side are Tenoned ready for the newel posts, the newel posts are morticed ready for the strings and the handrails, the handrail is Pre-cut , the Baserail is Pre-cut - the Spindles are Pre-cut, the Fillets are supplied oversize (You will need to cut these). Newel caps are not supplied.

Staircases with individual riser heights less than 198mm will have a individual going size of 220mm so the pitch will be slightly less than 42º

The Rise is the Floor to floor Height.

Typical production time on these is 2 weeks, then delivery subject to a delivery run in your area.

This is for a 12 Riser Straight Staircase with handrails on the right hand side going up the staircase, the staircase will be made to 42º please select from the options provided.

Specification
Strings - 32mm Engineered Pine
Treads - 22mm MDF
Risers - 9mm Plywood
Newel Posts - 90 x 90mm Pine Square
Spindles - 32 x 32mm Pine Square
Handrail - 66 x 63mm Pine SHR Profile
Baserail - Pine SBR Profile

Please note the newel posts will add 30mm to the overall width.

What you get - The stair strings on the face side are Tenoned ready for the newel posts, the newel posts are morticed ready for the strings and the handrails, the handrail is Pre-cut , the Baserail is Pre-cut - the Spindles are Pre-cut, the Fillets are supplied oversize (You will need to cut these). Newel caps are not supplied.

Staircases with individual riser heights less than 198mm will have a individual going size of 220mm so the pitch will be slightly less than 42º

The Rise is the Floor to floor Height.

Typical production time on these is 2 weeks, then delivery subject to a delivery run in your area.

This is for a 13 Riser Straight Staircase with handrails on the right hand side going up the staircase, the staircase will be made to 42º please select from the options provided.

Specification
Strings - 32mm Engineered Pine
Treads - 22mm MDF
Risers - 9mm Plywood
Newel Posts - 90 x 90mm Pine Square
Spindles - 32 x 32mm Pine Square
Handrail - 66 x 63mm Pine SHR Profile
Baserail - Pine SBR Profile

Please note the newel posts will add 30mm to the overall width.

What you get - The stair strings on the face side are Tenoned ready for the newel posts, the newel posts are morticed ready for the strings and the handrails, the handrail is Pre-cut , the Baserail is Pre-cut - the Spindles are Pre-cut, the Fillets are supplied oversize (You will need to cut these). Newel caps are not supplied.

Staircases with individual riser heights less than 198mm will have a individual going size of 220mm so the pitch will be slightly less than 42º

The Rise is the Floor to floor Height.

Typical production time on these is 2 weeks, then delivery subject to a delivery run in your area.

This is for a 14 Riser Straight Staircase with handrails on the right hand side going up the staircase, the staircase will be made to 42º please select from the options provided.

Specification
Strings - 32mm Engineered Pine
Treads - 22mm MDF
Risers - 9mm Plywood
Newel Posts - 90 x 90mm Pine Square
Spindles - 32 x 32mm Pine Square
Handrail - 66 x 63mm Pine SHR Profile
Baserail - Pine SBR Profile

Please note the newel posts will add 30mm to the overall width.

What you get - The stair strings on the face side are Tenoned ready for the newel posts, the newel posts are morticed ready for the strings and the handrails, the handrail is Pre-cut , the Baserail is Pre-cut - the Spindles are Pre-cut, the Fillets are supplied oversize (You will need to cut these). Newel caps are not supplied.

Staircases with individual riser heights less than 198mm will have a individual going size of 220mm so the pitch will be slightly less than 42º

The Rise is the Floor to floor Height.

Typical production time on these is 2 weeks, then delivery subject to a delivery run in your area.